PDF and image files arrive when the source is not under your control: a supplier's packing document, a customer's artwork, a product photo from a catalogue. The software handles them with two separate functions — PDF Printing and Image Printing — and each has its own dialog, its own steps and its own set of settings. This guide walks both, in the order the tutorials give them.
The other job these two functions do not cover
There is a second way PDF and image content reaches a label, and it is worth separating because the two get mixed up constantly. The dialogs above print a document as the label — the whole label is the document. The other job is putting a picture or a PDF page inside a label you have designed, next to a barcode, a price and a variable field.
That second job does not happen in the print dialog; it happens in the editor, by adding an image element to the canvas and placing it like any other object. The distinction decides where you start: if the label is the document, open PDF Printing or Image Printing; if the label contains the document, start a normal label and add the image there.
Getting this wrong is the most common reason for a wasted print. Printing a shipping document through the label-design route gives you a label with a document shrunk onto it; placing a label layout into the image print dialog gives you a picture with no variable fields at all.
Where the two functions live
Both are reachable from the home screen's left rail and from the new-label wizard, where they appear as Print PDF and Print Image on the top row of starting routes. The tutorial's first step for either one is simply to click the matching entry — the dialog opens without a canvas, because there is no design work to do.
That distinction matters: these two functions are printing tasks, not design tasks. The document already has its layout; what you are deciding is which page, what size, which way round, and how many.
Printing a PDF: the nine steps
The PDF tutorial is written as a numbered walkthrough. Followed literally, it goes like this.
1. From the software's home page, click PDF Print. The PDF printing interface opens.
2. In that interface, click Select PDF. A file dialog opens on your local machine.
3. Choose the PDF in that dialog and confirm — add the PDF, select it, then click the confirmation button. The document loads into the preview pane, and the page thumbnails appear down the right-hand side.
4. Set the printing direction: 0°, 90°, 180° or 270°. This is the rotation applied at print time, and it is the answer to a label that comes out sideways without anything being wrong with the file.
5. Set the label size — width and height in millimetres. The preview's readout confirms the current selection size in the same units, so the two can be checked against each other.
6. Choose the printer from the printer list — the one installed on this machine that the stock is loaded in.
7. Set the print range and the copies. The range is expressed as from N to N, so a forty-page document where only page three is the label is set to 3 to 3.
8. If only part of the page is the label, tick Crop the print area and drag the green border around the region you need. This is the control that turns a full A4 supplier document into a 60 × 40 mm label.
9. Click Print.
Two more controls sit at the bottom of the same dialog and are worth knowing about before you need them: Save as New PDF writes the current selection back out as a PDF, and Convert PDF to Image turns the page into an image — the route to take when the print path will not accept the document as it is. Merge PDF combines several files into one, which is how a batch of supplier documents becomes a single print job.
The scaling mode nobody notices until it goes wrong
Above the direction and size settings is the scaling mode, with two options: Proportional Scaling and Stretch Fill. The difference is what happens when the document's proportions do not match the label's.
Proportional scaling keeps the aspect ratio, so the content grows or shrinks as a whole and leaves a margin on the axis that does not fill. Stretch fill makes the content occupy the whole label, which changes the ratio. For a document that is a photograph or a drawing, proportional is the safe default; stretch fill is for a layout that was drawn at the wrong proportions on purpose.
Printing images: the eight steps
The image tutorial does the same job through a different dialog, and its steps are numbered the same way.
1. From the home page, click Image Printing. The image printing interface opens.
2. Click Select Image Files and choose the picture. The path of the selected file is shown in the field underneath, so you can see what is loaded.
3. Choose the printer.
4. Set the printer label size — label width and height in millimetres. These are the label's physical dimensions, not the image's.
5. Choose the scaling mode: proportional scaling, or stretch fill.
6. Set the printing direction: 0°, 90°, 180° or 270°.
7. Set the print range and copies.
8. If only part of the image is wanted, tick Crop the print area and drag the green border, then click Print.
The two dialogs are the same eight decisions
Once both are open, the two functions are remarkably similar. Each asks for a source, a printer, a physical label size, a scaling mode, a direction, a range, a copy count and a crop — and each ends in the same Print button. What differs is only the source and the extra tools that come with it: the PDF dialog adds a page-thumbnail panel, a page range with real pages behind it, and the convert and merge buttons.
That is why a user who has printed one of these can print the other: the settings to check are the same list, in the same order.
Frequently asked questions
Can I print only one page from a multi-page PDF?
Yes. Set the print range to that page — the range is written as from N to N, and the thumbnail panel on the right shows which page you are selecting.
My label came out rotated. What do I change?
The printing direction. It offers 0°, 90°, 180° and 270°, and it is applied at print time, so the source document does not have to be fixed.
Does the PDF or image have to be the same size as the label?
No — that is what the label width and height fields and the scaling mode are for. Set the physical label size, then choose proportional scaling to keep the aspect ratio or stretch fill to use the whole label.
Can I print a batch of different PDFs in one go?
Not in one print job through this dialog. Merge PDF lets you combine several files into one, which is the practical way to turn a set of documents into a single run.
Can I turn a PDF page into an image?
Yes — Convert PDF to Image is in the PDF dialog. It is the route to take when the print path will not accept the document as it is.
What does the crop option actually do?
It limits printing to the region inside the green border, dragged over the preview. Supplier documents that carry a label somewhere on an A4 page are the usual case.
barcode and QR code labels · MasoLabel review · label printer troubleshooting